Automic - Mechanical Type
Semi Automatic Vertical Type Plastic Injection Moulding Machine
Features
Ø Bench mounting type
Ø Moulds of hand opetared machines can be used
Ø Simple electrical system
Ø Versatile machine suitable for moulding various textile parts, automobile parts, industrial     items, insert mouldings, electrical fittings, pens and stationary items, jewelry boxes, gift     articles, hardware items, plumbing items, caps, closures, house hold articles, etc.
Model:
AM-15
AM-30
AM-60
AM-100
AM-125
AM-180
Max. Moulding Capacity (gms.):
15
30
60
100
125
180
Max. Plasticising Capacity (kg / hr):
1.5
2.5
3.5
4.5
5.0
7.0
Max. Shots per Hour (nos / hr):
120
120
100
80
80
80
Distance - Back to Cylinder Nose (mm):
72
75
80
90
90
120
Distance - Cylinder Nose to Base (mm):
135
165
200
225
225
250
Working Base Width (mm):
300
300
325
325
375
400
Adjustment of Clamping Vice (mm):
70
80
110
125
125
135
Hopper Capacity (gms):
500
750
800
1000
1225
2000
Electric Motor (HP):
0.25
0.5
0.5
1.0
1.0
2.0
Heating Load (kW):
1.2
1.5
1.5
2.5
2.5
3.0
Net / Gross Weight (kgs):
175 / 235
250 / 340
300 / 400
325 / 440
350 / 470
450 / 600
Overall dimensions (m):
1.0 x 0.5 x 1.0
1.2 x 0.5 x 1.05
1.35 x 0.6 x 1.2
1.6 x 0.6 x 1.3
1.8 x 0.6 x 1.3
2.0 x 0.7 x 1.5
Shipping Volume (m3):
0.50
0.65
1.00
1.25
1.45
2.10
Thermoplastics Moulded:
Polystyrenes, Polyethylenes, Polypropylenes (Extra opt. Cylinders avbl for moulding Nylon, Polyester, acrylics, soft PVC, etc.)
Injecta – Horizontal Hydraulic Injection Plastic Injection Moulding Machines
Horizontal Hydraulic Semi and Fully Automatic Plastic Injection Moulding Machines, Plunger Type
Semi Automatic Plunger TypeModel: IN-60, IN-75
Fully Automatic Plunger TypeModel: IN-100, IN-125
Model:
IN-60
IN-75
IN-100
IN-125
Max. Moulding Capacity (gms.):
60
75
100
125
Max. Injection Pressure (kg/cm2)/(psi)
1000 / 15000
1000 / 15000
1000 / 15000
1000 / 15000
Max. Plasticising Capacity*
Semi Automatic (kg / hr):
7.20
9.00
10.00
10.00
Max. Plasticising Capacity*
Fully Automatic (kg / hr)
10.80
12.00
13.00
13.75
Max. Shots per Hour*
Semi Automatic (nos / hr)
120
120
100
80
Max. Shots per Hour*
Fully Automatic (nos / hr)
180
160
130
110
Max. Dimension of mould L x B x H (mm)
245x250x250
270x250x270
290x300x300
290x300x300
Max. Mould opening (mm)
225
250
300
320
Number Tie Bars (nos)
2
2
4
4
Clear Gap between Tie Bars (mm)
275
300
300 x 125
300 x 125
Centre Height of Injection Nozzle (mm)
175
190
225
225
Clamping Force (tons)
30
35
60
80
Max. Pump Pressure (adjustable) (kg / cm2)
140
140
140
140
Oil Tank Capacity (litres)
100
115
150
150
Electric Motor (HP)
7.5
10
12.5
12.5
Total Heating Load (kW)
1.5
1.75
3.0
4.0
Approximate Machine Dimensions (mm)
2300x600x1400
2500x600x1400
2800x750x1600
3000x750x1600
Approximate Shipping Volume (m3)
2.85
3.10
4.70
4.00
Injecta - Horizontal Hydraulic, Fully Automatic Plastic Injection Moulding Machines, Screw Type
Fully Automatic Screw TypeModel: IN-100S, IN-125S
Model:
IN-60S
IN-75S
IN-100S
IN-125S
Screw Diameter (mm):
30
30
35
35
Max. Moulding Capacity (gms.):
60
75
100
125
Max. Injection Pressure (kg/cm2)/(psi)
1100
1200
1800
1800
Max. Plasticising Capacity* (kg / hr):
14.4
18
18
22.5
Max. Shots per Hour* (nos / hr):
240
240
180
180
Dry Cycles per Hour:
400
400
350
350
Max. Swept Volume (cm3):
77
90
120
140
Max. Dimension of mould L x B x H (mm)
245x250x250
270x250x270
290x300x300
290x300x300
Max. Mould opening (mm)
225
250
300
320
Number Tie Bars (nos)
2
2
4
4
Clear Gap between Tie Bars (mm)
275
300
320 x 145
320 x 145
Centre Height of Injection Nozzle (mm)
175
190
225
225
Clamping Force (tons)
30
35
60
80
Max. Pump Pressure (adjustable) (kg / cm2)
140
140
140
140
Oil Tank Capacity (litres)
100
115
175
200
Electric Motor (HP)
7.5
10
12.5
12.5
Total Heating Load (kW)
1.5
1.75
2.5
3.2
Approximate Machine Dimensions (mm)
2300x600x1400
2500x600x1400
2800x750x1600
3000x750x1600
Approximate Net / Gross Weight (Kgs.):
1200 / 1500
1500 / 1700
2700 / 3000
2800 / 3200
Approximate Shipping Volume (m3)
2.85
3.10
4.70
5.00
Thermoplastics Moulded:
Polystyrenes, Polyethylenes, Polypropylenes, acrylics, ABS, flexible PVC, rigid PVC (in Screw Type machines only), etc. Extra optional Nozzles available for moulding Nylon, Polyester, etc.
* Depends on material, processing conditions, individual articles, mould design, etc
Plasjet - Horizontal Hydraulic, Fully Automatic Plastic Injection Moulding Machines with Direct Drive Screw
Features:
Ø Soft mould closing and opening with speed control.
Ø Low Pressure mould protection provided.
Ø Direct Hydraulic Screw drive with reciprocating injection carriage.
Ø Multi-Stage Injection pressure / speed
Ø Suck-back screw for melt decompression
Ø Injection with screw rotation facility
Ø Hydraulically and electrically interlocked safety gate
Ø Central lubrication
Ø PJ-65 and PJ-80 with Toggle Type mould clamping unit
Ø PJ-100 and PJ-180 with Direct Hydraulic Telescopic Ram type Clamping     Unit
Model:
PJ - 65
PJ - 80
PJ - 100
PJ - 180
Screw Diameter (mm)
35
35
40
55
Injection pressure (Bar)
1760
1760
1350
1500
Stroke Volume (cm3)
105
120
201
380
Screw Stroke (mm)
110
135
160
190
Max. Injected Weight (Gms)
95
117
180
340
Injection Rate (Gms/Sec)
70
82
138
159
Plastizing Rate (Gms/Sec)
8.7
10.5
15
22
Screw Lenght (max.) (L/D)
22
22
20
16
Screw Speed (RPM)
250
250
250
200
Heating Capacity (kW)
6.0
6.5
10.0
11.0
No of Heating Zones
4
4
4
5
Nozzle Holding Force (kN)
20
20
40
50
Clamping Unit
Hydraulic Toggle
Hydraulic Toggle
Direct Hydraulic Telescopic Ram
Direct Hydraulic Telescopic Ram
Clamping Force (kN)
650
800
1000
1800
Mould Opening Stroke (mm)
300
300
500
550
Mould Height (min / max) (mm)
150 / 300
175 / 350
200
350
Max. Daylight (mm)
600
650
700
900
Clear Gap between Tie Bars (mm)
320 x 145
320 x 145
325 x 325
425 x 425
Size of Mould Plates (H x V) (mm)
500 x 325
500 x 325
525 x 525
650 x 650
Ejector Force (kN)
Mechanical
Mechanical
40
70
Ejector Force (mm)
90
90
95
125
Pump Drive (kW)
9.37
10.25
15
22.5
Total Connected Power (kW)
15.37
17.75
25
33.5
Oil Tank Capacity (Litres)
225
250
375
500
Approximate Shipping Dimensions (mm)
3800 x 1000 x 1700
4000 x 1000 x 1700
5200 x 1200 x 1700
5600 x 1300 x 1800
Approximate Net / Gross Weight (kgs)
2300 / 2800
2500 / 3000
5000 / 6000
6500 / 7800
Approximate Shipping Volume (m3):
6.5
6.8
10.6
13.1
Optional Accessories:
Microprocessor Control with Mould Program Memory, Hydraulic Ejector
Vertical Plastic Injection Moulding Machine with Horizontal Hydraulic Toggle Locking
60-VH/S
60-VH Fully Automatic
60-VH Semi Automatic
AU-30-HD
Features
Horizontal Toggle Locking (Hydraulic Toggle)
Injection Unit can be raised and lowered vertically as per requirement of moulds
Mould Runner center can be aligned horizontally by shifting the fixed platen
Plunger Type Machine Model 60-VH available in both Semi and Fully Automatic Type.
Screw Type Machine Model 60-VH/S available in Fully Automatic Type (Suck back provided)
MODEL:
60-VH
60-VH/S
Type:
Plunger Type
Screw Type
Max. Moulding Capacity* (gms.):
60
60
Screw Diameter (mm):
--
30
Max. Swept Volume (cm3):
--
70
Max. Injection Pressure* (kg / cm2):
900
1100
Max. Plasticising Capacity*
Semi / Fully Automatic (kg / hr):
7.2 / 10.8
-- / 14.4
Max. Shots per Hour*
Semi / Fully Automatic (nos / hr):
120 / 180
-- / 240
Max. dimensions of mould L x B x H (mm):
200 x 200 x 200
200 x 200 x 200
Max. Mould Opening (mm):
200
200
Number of Tie Bars:
2
2
Clear Gap between Tie Bars (mm):
230
230
Injection Nozzle Centre (mould back to Runner) (mm):
30 - 80 Adjustable
30 - 80 Adjustable
Clamping Force (Adjustable) (Tons):
25 Hydraulic Toggle
25 Hydraulic Toggle
Max. Pump Pressure (adjustable) (kg / cm2):
140
140
Oil Tank Capacity (Liters):
75
75
Electric Motor (HP):
3
3 (Hydraulic System) + 2 (Screw Drive)
Total Heating Load (kW):
1.5
1.5
Approximate Machine Dimensions L x B x H (mm):
1480 x 700 x 2400
1480 x 700 x 2400
Approximate Net / Gross Weight (Kgs.):
700 / 1000
850 / 1150
Approximate Shipping Volume (m3):
3.20
3.20
Vertical Semi Automatic Bench Mounting Plastic Injection Moulding Machines Plunger Type
Features:
Fully Hydraulic Injection and Clamping Unit
Operation by manually actuated Hydraulic Valves
Injection Unit vertically adjustable to accommodate various moulds
Fixed mould plates adjustable to align nozzle centre to mould runner
Direct mould clamping unit. Does not need adjustment for stroke as it is Direct Locking Type
Hand Moulds can be used. Automatic moulds with vertical injection can also be used
MODEL:
AU-30-HD
AU-60-HD
Max. Moulding Capacity* (gms.):
30
60
Max. Injection Pressure* (kg / cm2):
800
800
Max. dimensions of mould L x B x H (mm):
150 x 150 x 100
150 x 150 x 100
Adjustment of Fixed Mould Plate (min. / max.) (mm):
60 / 90
60 / 90
Vertical adjustment of Injection Unit to accommodate mould height (min. / max.) (mm):
90 / 150
90 / 150
Maximum moulding projected area* (cm2):
30
40
Clamping Force (Tons):
7.5
7.5
Clamping Stroke (mm):
75
75
Electric Motor (HP):
2
2
Approximate Machine Dimensions L x B x H (mm):
1100 x 680 x 1250
1100 x 680 x 1325
Approximate Net / Gross Weight (Kgs.):
300 / 450
350 / 500
Approximate Shipping Volume (m3):
1.30
1.35
Thermoplastics Moulded
Polystyrenes, Polyethylenes, Polypropylenes (Extra optional Nozzles available for moulding Nylon, Polyester, acrylics, soft PVC, etc.)
 * Depends on material, processing conditions, individual articles, mould design, etc.
We Also Offer.......

Paper Tapping

Perforating Machine

Bench Grinders

Drilling Machine

Swaging Machine

Bending / Taper Rollers

Glass Basins

Perforated Sheets

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Jaikvin Enterprises
504, Matruchhayya, 378/80, Narshi Natha Street, Mumbai-400 009.
Tel: 0091-22-23441968, 23415648. Fax: 0091-22-23401715 E-Mail: jaikvin@mtnl.net.in